aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2016-01-04 03:05:15 +0000
committerStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2016-01-04 03:05:15 +0000
commit6e734d8c2a479e8cc9f4ab13f7f24e1f560dc063 (patch)
tree65b772847d7325b0739a7a74a455644cca8db997
parent1773a326ad4bef808216ad1255266854dea4a264 (diff)
serprog: allow to omit specifying a baud rate
On USB-based serial connections (VCP) the requested baud rate usually does not matter (much). Remove the arbitrary restriction and use whatever default values the OS/hardware provides. Corresponding to flashrom svn r1907. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
-rw-r--r--flashrom.8.tmpl26
-rw-r--r--programmer.h4
-rw-r--r--serial.c25
-rw-r--r--serprog.c44
4 files changed, 53 insertions, 46 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 8b5f98c..26ea6e9 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -203,10 +203,9 @@ JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
Multi-Protocol Adapter (TUMPA), TUMPA Lite, and GOEPEL PicoTAP.
.sp
-.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \
-including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \
-Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo, and \
-atmegaXXu2-flasher by Stefan Tauner."
+.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog, \
+including Arduino-based devices as well as various programmers by Urja Rannikko, \
+Juhana Helovuo, Stefan Tauner and others)."
.sp
.BR "* buspirate_spi" " (for SPI flash ROMs attached to a Bus Pirate)"
.sp
@@ -683,19 +682,22 @@ parameter with the
syntax.
.SS
.BR "serprog " programmer
-A mandatory parameter specifies either a serial
-device/baud combination or an IP/port combination for communication with the
-programmer. In the device/baud combination, the device has to start with a
-slash. For serial, you have to use the
+A mandatory parameter specifies either a serial device (and baud rate) or an IP/port combination for
+communicating with the programmer.
+The device/baud combination has to start with
+.B dev=
+and separate the optional baud rate with a colon.
+For example
.sp
-.B " flashrom \-p serprog:dev=/dev/device:baud"
+.B " flashrom \-p serprog:dev=/dev/ttyS0:115200"
.sp
-syntax and for IP, you have to use
+If no baud rate is given the default values by the operating system/hardware will be used.
+For IP connections you have to use the
.sp
.B " flashrom \-p serprog:ip=ipaddr:port"
.sp
-instead. In case the device supports it, you can set the SPI clock frequency
-with the optional
+syntax.
+In case the device supports it, you can set the SPI clock frequency with the optional
.B spispeed
parameter. The frequency is parsed as hertz, unless an
.BR M ", or " k
diff --git a/programmer.h b/programmer.h
index 3bf292d..97f0ffa 100644
--- a/programmer.h
+++ b/programmer.h
@@ -719,10 +719,8 @@ typedef int fdtype;
#endif
void sp_flush_incoming(void);
-fdtype sp_openserport(char *dev, unsigned int baud);
-int serialport_config(fdtype fd, unsigned int baud);
+fdtype sp_openserport(char *dev, int baud);
extern fdtype sp_fd;
-/* expose serialport_shutdown as it's currently used by buspirate */
int serialport_shutdown(void *data);
int serialport_write(const unsigned char *buf, unsigned int writecnt);
int serialport_write_nonblock(const unsigned char *buf, unsigned int writecnt, unsigned int timeout, unsigned int *really_wrote);
diff --git a/serial.c b/serial.c
index d076bc8..75297f7 100644
--- a/serial.c
+++ b/serial.c
@@ -116,7 +116,7 @@ static const struct baudentry sp_baudtable[] = {
{0, 0} /* Terminator */
};
-const struct baudentry *round_baud(unsigned int baud)
+static const struct baudentry *round_baud(unsigned int baud)
{
int i;
/* Round baud rate to next lower entry in sp_baudtable if it exists, else use the lowest entry. */
@@ -125,11 +125,12 @@ const struct baudentry *round_baud(unsigned int baud)
return &sp_baudtable[i];
if (sp_baudtable[i].baud < baud) {
- msg_pinfo("Warning: given baudrate %d rounded down to %d.\n",
+ msg_pwarn("Warning: given baudrate %d rounded down to %d.\n",
baud, sp_baudtable[i].baud);
return &sp_baudtable[i];
}
}
+ msg_pinfo("Using slowest possible baudrate: %d.\n", sp_baudtable[0].baud);
return &sp_baudtable[0];
}
@@ -154,7 +155,7 @@ static void msg_perr_strerror(const char *msg)
#endif
}
-int serialport_config(fdtype fd, unsigned int baud)
+int serialport_config(fdtype fd, int baud)
{
if (fd == SER_INV_FD) {
msg_perr("%s: File descriptor is invalid.\n", __func__);
@@ -167,8 +168,10 @@ int serialport_config(fdtype fd, unsigned int baud)
msg_perr_strerror("Could not fetch original serial port configuration: ");
return 1;
}
- const struct baudentry *entry = round_baud(baud);
- dcb.BaudRate = entry->flag;
+ if (baud >= 0) {
+ const struct baudentry *entry = round_baud(baud);
+ dcb.BaudRate = entry->flag;
+ }
dcb.ByteSize = 8;
dcb.Parity = NOPARITY;
dcb.StopBits = ONESTOPBIT;
@@ -188,10 +191,12 @@ int serialport_config(fdtype fd, unsigned int baud)
return 1;
}
wanted = observed;
- const struct baudentry *entry = round_baud(baud);
- if (cfsetispeed(&wanted, entry->flag) != 0 || cfsetospeed(&wanted, entry->flag) != 0) {
- msg_perr_strerror("Could not set serial baud rate: ");
- return 1;
+ if (baud >= 0) {
+ const struct baudentry *entry = round_baud(baud);
+ if (cfsetispeed(&wanted, entry->flag) != 0 || cfsetospeed(&wanted, entry->flag) != 0) {
+ msg_perr_strerror("Could not set serial baud rate: ");
+ return 1;
+ }
}
wanted.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS);
wanted.c_cflag |= (CS8 | CLOCAL | CREAD);
@@ -232,7 +237,7 @@ int serialport_config(fdtype fd, unsigned int baud)
return 0;
}
-fdtype sp_openserport(char *dev, unsigned int baud)
+fdtype sp_openserport(char *dev, int baud)
{
fdtype fd;
#if IS_WINDOWS
diff --git a/serprog.c b/serprog.c
index a2a3fe0..917aba5 100644
--- a/serprog.c
+++ b/serprog.c
@@ -342,26 +342,28 @@ int serprog_init(void)
unsigned char rbuf[3];
unsigned char c;
char *device;
- char *baudport;
int have_device = 0;
- /* the parameter is either of format "dev=/dev/device:baud" or "ip=ip:port" */
+ /* the parameter is either of format "dev=/dev/device[:baud]" or "ip=ip:port" */
device = extract_programmer_param("dev");
if (device && strlen(device)) {
- baudport = strstr(device, ":");
- if (baudport) {
+ char *baud_str = strstr(device, ":");
+ if (baud_str != NULL) {
/* Split device from baudrate. */
- *baudport = '\0';
- baudport++;
+ *baud_str = '\0';
+ baud_str++;
}
- if (!baudport || !strlen(baudport)) {
- msg_perr("Error: No baudrate specified.\n"
- "Use flashrom -p serprog:dev=/dev/device:baud\n");
- free(device);
- return 1;
- }
- if (strlen(device)) {
- sp_fd = sp_openserport(device, atoi(baudport));
+ int baud;
+ /* Convert baud string to value.
+ * baud_str is either NULL (if strstr can't find the colon), points to the \0 after the colon
+ * if no characters where given after the colon, or a string to convert... */
+ if (baud_str == NULL || *baud_str == '\0') {
+ baud = -1;
+ msg_pdbg("No baudrate specified, using the hardware's defaults.\n");
+ } else
+ baud = atoi(baud_str); // FIXME: replace atoi with strtoul
+ if (strlen(device) > 0) {
+ sp_fd = sp_openserport(device, baud);
if (sp_fd == SER_INV_FD) {
free(device);
return 1;
@@ -371,7 +373,7 @@ int serprog_init(void)
}
if (device && !strlen(device)) {
msg_perr("Error: No device specified.\n"
- "Use flashrom -p serprog:dev=/dev/device:baud\n");
+ "Use flashrom -p serprog:dev=/dev/device[:baud]\n");
free(device);
return 1;
}
@@ -386,20 +388,20 @@ int serprog_init(void)
return 1;
}
if (device && strlen(device)) {
- baudport = strstr(device, ":");
- if (baudport) {
+ char *port = strstr(device, ":");
+ if (port != NULL) {
/* Split host from port. */
- *baudport = '\0';
- baudport++;
+ *port = '\0';
+ port++;
}
- if (!baudport || !strlen(baudport)) {
+ if (!port || !strlen(port)) {
msg_perr("Error: No port specified.\n"
"Use flashrom -p serprog:ip=ipaddr:port\n");
free(device);
return 1;
}
if (strlen(device)) {
- sp_fd = sp_opensocket(device, atoi(baudport));
+ sp_fd = sp_opensocket(device, atoi(port)); // FIXME: replace atoi with strtoul
if (sp_fd < 0) {
free(device);
return 1;